Samtec Connector Blog

Industry insights, product selection tips, and technical tutorials from our engineering team.

Blog · Monday 31st of August 2026 · Rowan Whitaker

Why I Trust Samtec Costa Rica for SEAM and DuraXV Extreme Rush Orders

A 36-hour rush order that almost went to a 'compatible' Samtec SEAM alternative. What we learned, why the real DuraXV Extreme cable mattered, and how the Samtec Costa Rica team kept the line moving.

Continue Reading →
Blog · Monday 31st of August 2026 · Rowan Whitaker

How to Use a Multimeter on a Samtec Connector: FTSH-105-01-L-DV-K Field Guide

A quality inspector explains how to use a multimeter to test Samtec FTSH connectors. Includes a Samtec company overview, the Platinum BP5450 question, and three practical test scenarios.

Continue Reading →
Blog · Monday 31st of August 2026 · Rowan Whitaker

How a Samtec Tiger Eye Order Almost Broke Our Deadline (and Why Quality Won)

An emergency coordinator's story about a last-minute Samtec Tiger Eye connector rush from New Albany, Indiana, and why quality perception matters in medical devices.

Continue Reading →
Blog · Monday 31st of August 2026 · Rowan Whitaker

How I Learned to Choose the Right Samtec Distributor: A Cost Manager's Story

A procurement manager reveals how a cheap Samtec distributor led to a multimeter failure, a 3310 connector disaster, and a costly lesson about total cost—all in the middle of a blood pressure monitor project.

Continue Reading →
Blog · Friday 28th of August 2026 · Rowan Whitaker

Samtec QTH vs IPL1 vs Cable Assemblies: How to Choose the Right Interconnect

Choosing between Samtec QTH, IPL1, and cable assemblies depends on your board geometry, signal path, power delivery, and manufacturing timeline. Here's how to decide before you freeze the design.

Continue Reading →
Blog · Friday 28th of August 2026 · Rowan Whitaker

Samtec Address, Sourcing Scenarios, and How to Use a Multimeter for Connector Checks

A cost controller's guide to buying and checking Samtec connectors: sample orders, production orders, incoming inspection, the Samtec New Albany Indiana address, and how to check a C300 or 3310 part with a multimeter.

Continue Reading →
Blog · Thursday 27th of August 2026 · Rowan Whitaker

How to Choose Samtec Distributors for ERM8 Connectors: A Cost Controller's Guide

A procurement perspective on choosing the right Samtec distributor for ERM8 connectors. Three scenarios for high-volume, prototyping, and engineering support needs—plus what phone durability has to do with connector sourcing.

Continue Reading →
Blog · Thursday 27th of August 2026 · Rowan Whitaker

Samtec FTSH vs TSM: A Field-Tested 8-Step Selection Checklist (with the Mistakes That Taught Me)

How to choose between Samtec FTSH and TSM board-to-board connectors without wasting budget. An 8-step field checklist covering stack height, signal integrity, plating, lead time, and real cost traps.

Continue Reading →
Blog · Wednesday 26th of August 2026 · Rowan Whitaker

Samtec Connectors: How to Order 2780 and C300 Parts (Direct vs. Distributor)

What are connectors, and where should you buy Samtec parts like the 2780 and C300? A procurement admin with 24 months of real orders compares buying direct from Samtec vs. authorized distributors.

Continue Reading →
Blog · Wednesday 26th of August 2026 · Rowan Whitaker

What Is a Connector? The Hidden Cost of the Smallest Part in Your Design

A cost-control perspective on what is connector, and why samtec header choices, transparent smartphone trends, and multimeter checks reveal the hidden total cost of interconnect components.

Continue Reading →